16
Timer Instructions
To set Timer to switch OFF
Step 5 Turn off the oven control
Automatically (Continued)
Step 6 Press the button to cancel the bleeping (If 2 minutes has
not elapsed)
Press button again to return to manual operation.
To set Timer to switch ON
(This allows you to cook at a specified time for a chosen period
& OFF Automatically
before the oven switches OFF Automatically
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
Step 3 Press and release the “ “ button. The display will read
0.00 with the cookpot lit. Within 2 seconds press and hold the
“
+
” button until the required cooking period is set.
(Adjustment can be made by pressing the “
-
“ button).
The timer display will revert to the time of day with the Auto
symbol and cookpot lit.
Step 4 Press and release the “ “ button. The display will read
the earliest possible end time with the cookpot and Auto
symbol lit.
Within 2 seconds press and hold the “
+
” to set the time you
require the food to be ready, with only the Auto symbol lit.
(Adjustment can be made by pressing the “
-
“ button).
Step 5 Turn the oven control to the required temperature.
(The oven will now switch on later at the designated time, cook
for the required period and switch off automatically at the stop
setting).
At the end of the cooking period the Auto symbol will flash and an
intermittent bleeping sound will be heard. This will continue for
approximately 2 minutes unless the timer is reset within this period (See
Step 7).
The oven will no longer operate until the timer has been reset to
manual operation (See steps 6 & 7 on the next page).
To Next Page
Loading...
