17
Timer Instructions
To set Timer to switch ON &
Step 6 Turn off the oven control
OFF Automatically (Continued)
Step 7 Press the button to cancel the bleeping
(If 2 minutes has not elapsed)
Press button again to return to manual operation.
Other Notes On Timer
1. When cooking Automatically the cook period can be checked at
Operation
any time simply by pressing the “ “ button.
2. When cooking Automatically the stop time can be checked at any
time simply by pressing the “ “ button. (This also can be
altered at any time by following Step 4 previously).
3. Having set a cooking period and stop time an electronic device
stores the information. The device within the timer will switch the
oven on at the required start time.
4. If a mistake is made and is not easily rectified, alter the cook period
to show 0.00 (As per step 3 above) then press the “ “
button (See step 7 above).
5. After an automatic sequence the bleeping sound can be switched
off by pressing any of the following three buttons.
However, the large oven cannot be operated until the timer has
been set to manual. Press the Button (See Step 7 above).
6. If at any time the display shows three flashing zeros 0.00. It is
likely that the electricity supply to the oven has been interrupted.
Reset the timer to the correct time of day. If there is any food in the
oven, make sure that it has been cooked thoroughly before serving.
7. To give yourself more time to set each function press and hold the
required function button and at the same time press “
+
“ or “
-
“
button.
Note: Between the hours of 10.00 p.m. and 6.00 a.m. the intensity of the
display reduces.
To Next Page
Loading...
