Belling platinum db3A - Setting Timer for Automatic Shut-off; Setting Timer for Automatic Start and Stop

15
Timer Instructions
To set Timer to switch OFF Step 5 Turn off the oven control
Automatically (Continued)
Step 6 Press the button to cancel the bleeping (If 2 minutes has
not elapsed)
Press button again to return to manual operation.
To set Timer to switch ON
(This allows you to cook at a specified time for a chosen period
& OFF Automatically before the oven switches OFF Automatically)
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
Step 3 Press and release the “ “ button. The display will read
0.00 with the cook-pot lit. Within 2 seconds press and hold the
“
+ ” button until the required cooking period is set.
(Adjustment can be made by pressing the “
- “ button).
The timer display will revert to the time of day with the Auto
symbol and cook-pot lit.
Step 4 Press and release the “ “ button. The display will
read the earliest possible end time with the cook-pot and Auto
symbol lit.
Within 2 seconds press and hold the “
+ ” to set the time
you require the food to be ready, with only the Auto symbol lit.
(Adjustment can be made by pressing the “
- “ button).
Step 5 Turn the oven control to the required temperature.
(The oven will now switch on later at the designated time, cook for the required period and switch off
automatically at the stop setting).
At the end of the cooking period the Auto symbol will flash and an intermittent bleeping sound will be heard.
This will continue for approximately 2 minutes unless the timer is reset within this period (See Step 7).
The oven will no longer operate until the timer has been reset to manual operation (See steps 6 & 7 on
the next page).