{b) To set the timer to switch ON immediately and
OFF
automatically after a set
cook
period.
Step
1 Check that the correct time of day is set. If not follow instructions for setting the
time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven
door
..
Step 3 Turn the oven control to the required temperature.
.&
V A
_&
V A
Step 4 Press and hold the 'cook time' cook period button, the display
will read 0.00 and symbol will light up.
With the cook period button still held set the required cook period
using the + and - buttons the A symbol will light up. e.g. 1 hour
30 minutes.
Note: The cook period
is
the length of time the food requires to cook.
Step 5 Release all buttons.
The timer display will revert to the time of day with the
A symbols
remaining lit.
At the end of the cook period the A symbol will flash and an intermittent
bleeping sound will be heard.
symbol will
go
out. The bleeping
sound will continue for several mintes unless cancelled (see Step 6). The
A symbol will continue to flash until the timer is returned to manual
operation (see below).
Step 6 Press the 'cook time' cook period button to cancel the bleeping.
Step 7 Turn the oven control(s)
to
the OFF position.
Step 8 Press the 'cook time' cook period and end time buttons together
to return the cooker to manual operation. The A symbol will go
out and symbol will light up.
When cooking automatically the cook period can be checked at any time by simply pressing the 'cook
time'
cook period button.
To
cancel the auto cooking programme before or after automatic cooking starts,
press the 'cook time' cook period and 'stop time' end time buttons together. This will return the cooker
to manual operation.
13
To Next Page
Loading...
