Self-testing and Help summary
To run a self-test, turn off the printer, press and hold the Paper Feed button and switch the printer on.
When the printer starts printing, release the Feed button. A message will be printed asking you to wait
for the self-test, choose the Configuration Mode or enter in Data Dump Mode. After the self-test the
printer returns to the “Ready” status (green Info LED).
For a Help summary, turn off the printer and turn the printer on while keeping the Cut button pressed.
Usage Environment
The MP-4000 TH should operate placed on a plain and stable surface. Keep the printer unobstructed -
especially the paper exit.
Do not hold or pull the receipts which are being printed.
This product is designed for indoor applications. Avoid using it in environments with high
humidity, subject to dust or intense heat.
CAUTION !
This printer can support different drawer models with a jumper configuration. Please refer to the
User’s Manual before connecting your cash drawer to the printer. Some drawer models may
damage the printer when connected with a wrong jumper configuration.
Drawer Activation
10
ENGLISH
To Next Page
Loading...
