7
2.4 Control Panel
1 Brightness – Press the “Brightness –” button to decrease
brightness. The setting will be saved 6 seconds
after releasing the button.
2 Brightness + Press the “Brightness +” button to increase
brightness. The setting will be saved 6 seconds
after releasing the button.
3 USB ports Connect external peripherals such as a
memory drive.
4 Power Button Press to turn the POS terminal on or off. The
LED lights up blue when the power is on.
Note: Press the “Brightness –” and “Brightness +” buttons at the
same time to restore brightness to the factory default
setting.
To Next Page
Loading...
