Ticket Speed:
This option sets the ticket eater motor speed
Range: 1-3
Default: 3 Fastest, about 8 tickets per second.
Back button: Reduce
Enter button: Return to Main menu
Next button: Increment
Ticket Value:
This option sets the prize points value of each ticket.
Range: 1/16 prize point to 8 prize points
Default: 1
Back button: Reduce ticket value
Enter button: Return to Main menu
Next button: Increment ticket value
Redemption Mode:
The system can run one of the following redemption modes:
1. Tickets + Receipt
• User introduces tickets and then presses button to print receipt.
2. Tickets + Card
• User introduces tickets and then swipes the game card (at any time) to transfer the current balance.
3. Tickets + receipt OR Card
• User introduces tickets and then presses button for receipt or swipes the game card (at any time) to
transfer the current balance.
4. Swipe + tickets + button:
• User swipes card, introduces tickets, and then presses the button to transfer the balance.
Card Swipe Transfer Type:
Signaling mode used when transferring balance to card system under tickets to card mode.
Pulsed: When user presses button or swipes card, one pulse per ticket will be sent to the card system.
Serial: When user presses button or swipes card, the balance is transmitted via an ascii string
Please see Card swipe Connection section for more details.
Default: Off
Back button: Toggle setting
Enter button: Return to Main menu
Next button: Toggle setting
Barcode Sensor Active level:
To Next Page
Loading...
