Edit Receipt Header:
Allows for editing of the first four lines of the receipt, as well as four lines after
the ticket quantity digits.
Each line can be a maximum of 20 characters long, including spaces and punctuation.
Each line is automatically centered on receipt and right-hand side spaces are ignored.
No need to center the line entry on the display.
Blank lines are not printed, no receipt space taken.
Default: Blank lines
Back button: Scroll cursor left. Hold to advance faster. Cursor wraps to previous line or into exit option
Next button: Scroll cursor right. Hold to advance faster. Cursor wraps to next line or into exit option
Enter button: Enter character editing
Character Editing:
Back button: Change character. Hold to advance faster. Character set wraps around at ends.
Next button: Change character. Hold to advance faster. Character set wraps around at ends.
Enter button: Accept character
Enable Receipt Logo:
If enabled, prints receipt logo graphics at the top of the receipt. Graphics must be pre-stored on USB
receipt printer. Refer to printer setup directions.
Default: Off
Back button: Toggle setting
Enter button: Return to Main menu
Next button: Toggle setting
Load Receipt Logo:
Loads custom receipt logo image from SD card into printer.
Image characteristics:
File name: logo.bmp. The ticket station will look for this name on the SD card at the root level.
File Format: .bmp. This image format can be created with your favorite graphics editing program.
Color depth: 1, 8, 24bpp accepted. Color images will be automatically changed to black & white.
For better results, make your image black and white in your editing program.
Width: 64 to 320 pixels
Height: 64 to 320 pixels
Printed logo image will be proportional to the size in pixels.
For example, a 256x256 image will be 32mm x 32mm (1.25") on the receipt.
A 320x320 image will be 40mm x 40mm (1.6").
Default: Benchmark Games logo
Back button: No, cancel
Enter button: -
Next button: Yes, load
To Next Page
Loading...
