benchmarkwireline.com
P. O. BOX 850
Fax: 281.342.4848
Phone: 281.342.6415
Simonton,Texas 77476
36220 FM 1093
AM5K User Manual Rev Q Oct 2007 Page 19 of 44
4.4.6 INSTALLING THE LOAD AXLE WHEEL
1. Insert the tension wheel into the frame. Make sure the slotted hole in
the tension wheel bushing is on the same side as the roll pin hole in
the frame and the grease hole is on the opposite side.
2. Use a bolt in place of the load pin to hold it in place. Install an allen
wrench or other long tool to align the hole in the bearing with the
slotted hole in the frame.
To Next Page
Loading...