Bender A-ISOMETER IRDH275 - Standards and Approvals

Technical data IRDH275(B)
62
TGH1361en/11.2009
7.2 Standards and approvals
The A-ISOMETER® was designed under consideration of the following
standards:
- DIN EN 61557-8 (VDE 0413-8):1998-05
- EN 61557-8:1997-03
- IEC 61557-8:1997-02
- EN 61326
- DIN EN 60664-1 (VDE 0110-1):2003-11
- DIN EN 60664-3 (VDE 0110-3):2003-09
- ASTM F1669M-96(2002)
- ASTM F1207M-96(2002)