ISOSCAN® EDS440 and EDS441
4 Mounting
4.1 General information
The devices are suitable for the following installation methods:
•
Distribution panels according to DIN 43871
•
Quick DIN rail mounting according to IEC 60715
•
Screw mounting using M4 screws
For UL applications:
•
Only use 60/75 °C copper lines.
•
Install in pollution degree 2 environment only.
4.2 Installation clearances
Application in railway vehicles / DIN EN 45545-2:2016
If the distance to adjacent components that do not meet the requirement of DIN EN 45545-2 Table 2 is
horizontally < 20 mm or vertically < 200 mm, they are to be considered as grouped. See DIN EN 45545-2
chapter 4.3 Grouping rules
EDS44x_D00201_10_M_XXEN/11.2023 19
To Next Page
Loading...