Bender ISOSCAN W Series - Change History

ISOSCAN® EDS440 and EDS441
Type Dimensions / internal diameter
in mm
Design type Art. no.
WS50x80/8000 50 × 80 split-core B911757
W10/8000-6 ø10 circular, 6-fold B911900
Measuring current transformers for EDS441-LAB
Bender measuring current transformers
Type Internal diameter in mm Design type Art. no.
CTUB102-CTBC20P ø20 circular B78120021
CTUB102-CTBC35P ø35 circular B78120023
CTUB102-CTBC60P ø60 circular B78120025
Measuring current transformers for EDS440-LAF
Bender measuring current transformers
Typ Dimensions in mm Design type Art. no.
CTAF500SET 500 flexible B98110022
CTAF1000SET 1000 flexible B98110023
12.4 Change history
Date Version Software version Changes
11.2020 08 – – – Cover page: Software > 2000
12.1.9: Nominal system voltages corrected
13.3.3: CTxx- series measuring current transformers
added/series in phase-out removed Classification of
climatic conditions
02.2022 09 – – – Editorial revision
4.4 / 5.10: Exact naming of X2 interface
13.2: DIN EN 45545-2:2016 added, UKCA added
EDS44x_D00201_10_M_XXEN/11.2023 83