Technical data
Connection
Screw-type terminals
Tightening torque 0.5…0.6 Nm (5…7 lb-in)
Conductor sizes AWG 24-12
Stripping length 7 mm
Rigid/flexible 0.2…2.5 mm²
Flexible with ferrule, with/without plastic sleeve 0.25…2.5 mm²
Multiple conductor, rigid 0.2…1 mm²
Multiple conductor, flexible 0.2…1.5 mm²
Multiple conductor, flexible with ferrule without plastic sleeve 0.25…1 mm²
Multiple conductor, flexible with TWIN ferrule with plastic sleeve 0.5…1.5 mm²
Push-wire terminals
Conductor sizes AWG 24-12
Stripping length 10 mm
Rigid/flexible 0.2…2.5 mm²
Flexible with ferrule, with/without plastic sleeve 0.25…2.5 mm²
Multiple conductor, flexible with TWIN ferrule with plastic sleeve 0.5…1.5 mm²
Push-wire terminals X1, X2
Conductor sizes AWG 24-16
Stripping length 10 mm
Rigid/flexible 0.2…1.5 mm²
Flexible with ferrule without plastic sleeve 0.25…1.5 mm²
Flexible with ferrule with plastic sleeve 0.25…0.75 mm²
Other
Operating mode continuous operation
Mounting
ambient temperature > 55 °C vertical
ambient temperature < 55 °C any alignment
Degree of protection, internal components IP40
Degree of protection, terminals IP20
DIN rail mounting IEC 60715
78 EDS44x_D00201_10_M_XXEN/11.2023
To Next Page
Loading...