Autostacker™ Parking Lift 49 P/N 5900002 — Rev. D — August 2019
Optional Access Panel
The optional Autostacker Access Panel gives you access to the underside of the Vehicle that is raised
on an Autostacker, making it into a Service Lift in addition to a Parking Lift.
You can install up to two Access Panels per Autostacker, which works with the
standard PL-6SR
model only
.
An Access Panel is made up of two pieces:
• The Structure. Is bolted to the Autostacker in place of three Platform sections. Holds the
Removable Panel.
• The Removable Panel. Sits in the Structure. Remove to access the underside of a Vehicle
parked on the Platform. Dimensions are 35 inches by 53 inches.
⚠ WARNING: The Removable Panel does not take up the entire width of the Platform; when
parking a Vehicle on the Platform, try to keep the tires off the Removable Panel—
keep them on the Structure instead.
The following image shows the major parts of the Access Panel.
To Next Page
Loading...
