EasyManua.ls Logo

Benelli Pepe - Troubleshooting; The engine does not start; The engine misfires; The engine loses power and knocks

Benelli Pepe
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
ELECTRIC START
DEMARRAGE ELECTRIQUE
ELECTRIC START
Place the vehicle on the stand.
Turn the ignition key to ON . Tournez la clé à ON .
Flip the ignition ON/OFF switch to .
Pull either of the brake levers (front or rear).
Press the start button without opening the throttle
and then release it as soon as the engine starts.
Allow the engine to warm up for at least one minute
before starting off.
On no account must the engine be
started in a closed and poorly ventilated
place. The exhaust gases contain carbon
monoxide, an extremely dangerous gas that may
cause fainting or even death.
Fig. 1
DÉMARRAGE ÉLECTRIQUE
Mettre le scooter sur la quille.
Mettez le contact interrupteur ON/OFF à .
Actionner un levier de trein (avant ou arrre).
Appuyer sur le bouton du marreur sans accélérer puis
relâcher dès que le moteur démarre.
Faire chauffer le moteur au moins une minute avant de se
mettre en route.
Eviter absolument de démarrer le
moteur dans un endroit clos ou avec
peu de ventilation. Les gaz d'échappement
contiennent du monoxyde de carbone, un gaz
extmement nocif pour l'organisme qui peut
provoquer des pertes de connaissance et même la
mort.
OPERATION
UTILISATION DE SCOOTER

Related product manuals