6. Riding a Prègo
How to start
Press the power on/off button, the motor starts. When you sit firmly on the bike, slowly rotate the
throttle, and the bike will start moving, and then slowly accelerate.
How to change gears
To speed up, start with a lower gear and shift to a higher gear as you speed up When going uphill, use
a lower gear
On a flat terrain, use a higher gear
How to brake
1) Release the throttle and stop pedaling.
2) squeeze the both brakes slowly and then tighten.
3) Do not brake or steer sharply. Emergency braking and sharp steering are the main factors causing
sideslip or rollover, which is extremely dangerous. If only the front or rear wheels are braked, and the
bike may slide horizontally, which is extremely dangerous.
To Next Page
Loading...
