Warning
1) The user must operate according to the instructions when charging;
2) Never use third party battery or charger for Benelli bikes.
3) When the charger is working, please place it in a safe, well ventilated place, out of reach of
children.
5) Do not leave the charger connect to AC power supply when not charging. This is dangerous, and
could cause fire hazards.
6) Do not cover the charger or adaptor when charging, please allow heat to dissipate easily.
7) Store charger and battery in a dry, clear box when not in use, keep away from small item that
might fall inside the charging port.
8) Beware of falling and impact to avoid damage.
9) Do not disassemble or replace the parts in the charger by yourself. When replacing the
charger, use original charger that match the lithium battery model.
8.2
Storage and Cleaning
Do not use excessive water to wash the plastic. Use a soft cloth with a neutral solution to wipe the dirt off the
plastic shells. After that, wipe it dry with a clean soft cloth.
CAUTION: Do not use high-pressure water or air hoses for cleaning. It can force water into electric components,
which may cause malfunctioning.
CAUTION: Do not wash the E-bike components with excessive water. If the internal electrical parts are infected
with water, the insulator may corrode which leads to power-drain or other problems.
CAUTION: Do not use non-neutral soap solutions to wash plastic components. Non-neutral solutions may cause
colour-change, distortion, scratching.
To Next Page
Loading...
