4.5
Adjust the handle bar position
1. Please turn the handlebar up, down, left and right, and make sure that the handlebar is
not loose.
2. loosen the screws at ① to adjust handlebar height. Loosen the screws at ②
to adjust the handlebar position
3. When adjusting the height of the handlebar, make sure that the safety wire on the stem tube is
not be exposed.
5. Check before riding
The power circuit and lighting are working. The
front and rear brake lever are working. The
handlebars are tightened.
The front & rear wheels are tightened. The tire
pressure is normal.
Check the reflector for contamination before cycling.
To Next Page
Loading...
