The motor hub
does not work
after the power
is
switched on
Battery wiring is loose;
Motor fault;
Electrical cable failure;
Repair and reconnection;
Professional repair or
replacement; Find a
professional repair or
repair shop
Short range on a
single charge
Insufficient tire pressure;
Insufficient charging or
charger failure;
Battery aging or damage; More
uphill, strong headwind,
frequent brake start, load big
Sufficient air; Sufficient
electricity or check whether
the charger plug is in bad
contact:
Find a professional repair
or repair shop.
It is recommended to use a
human foot assist
in these cases .
The charger socket falls off
or the plug is disconnected
from the socket
The internal fuse of the
charger is blown out
Battery wiring comes off.
Tighten socket box
connectors; Replace
the fuse; Welding line
When you encounter any
problem that cannot be
excluded by yourself under
the above instructions
Obstacles or undetermined
faults; Motor hub, controller,
charger and battery pack are
damaged at the right time.
In case of any of the above,
please contact the supplier
or maintenance station. Do
not open the above parts
without authorization, or you
will lose our warranty
commitment.
To Next Page
Loading...
