Bennett Pacific Series - Bennett Limited Warranty; 111660 Rev C

65
111660 Rev C 5-13-14
Bennett Limited Warranty
for Products Installed Internationally
Pumps and Dispensers – Horizon 2 and 3000 Series
Warranty on parts is 12 months from date of installation not to exceed 18 months
from date of Bennett’s original invoice, whichever comes first.
This warranty excludes nozzles, hoses and fittings, hose retractor, filters, belt
adjustments, paper jams, light bulbs, or any leaks after the installation start-up
and audit. Minor adjustments such as meter calibration, pulser adjustments, and
handle switch adjustments, customer specified items manufactured by others,
and customer requested reprogramming of equipment are not covered by
warranty.
Pumps and Dispensers - All Other Models
Warranty on parts is 12 months from date of installation or 18 months from date
of Bennett’s original invoice, whichever comes first.
This warranty excludes nozzles, hoses and fitting, hose retractor, filters, belt
adjustments, paper jams or light bulbs. Minor adjustments such as meter
calibration, pulser adjustments, and handle switch adjustments, customer
specified items manufactured by others, and customer requested reprogramming
of equipment are not covered by warranty.
Field Retrofitted Card Acceptor or Cash Acceptor
The field retrofit assembly is warranted for parts for 12 months from date of
installation or 18 months from date of original invoice, whichever comes first,
except the receipt printer and driver board which is warranted for parts for ninety
(90) days from the date of installation or 180 days from original invoice,
whichever comes first.
Consumable Items such as receipt paper are not warranted. The use of receipt
paper not specified by Bennett will void the printer assembly warranty.
Model 515 Pump Controllers
Warranty on parts is 12 months from the date of installation or 18 months from
the date of original invoice, whichever comes first.
Software
Bennett Pump Company warrants Bennett products and software packages,
whose operation is controlled by Bennett designed and developed software, shall
be free of material defects and conform to current Bennett specifications for a
period of ninety (90) days from the date of original invoice. Bennett shall use its
best effort to correct such defects and to supply to purchaser at Bennett’s
expense, a corrected version within a reasonable time after purchaser notifies
Bennett in writing of any defects and provides the programs and instructions
required to reproduce the claimed defect.
This would not cover any modification to the program, the Bennett product, and/or
connection to unapproved equipment made by any person or any defect caused
by such modifications/connections.
Upgrade Kits
Bennett offers kits which are installed at the purchaser’s option to enhance
operating features of an existing Bennett product. These upgrade kits are
warranted for parts for ninety (90) days from date of installation or 12 months
from date of original invoice, whichever comes first. This warranty applies to kit
components only. The warranty status of the remainder of the product is
unchanged.
Spare Parts
For equipment under warranty: The warranty period for all spare parts re-placed
is the remainder of the original warranty. Spare Parts are warranted for the value
of the parts only.
For equipment not under warranty: The warranty period is 90 days from the date
of invoice to the end user, or 12 months from the date of original in-voice,
whichever comes first. Spare Parts are warranted for the value of the parts only.
General Exclusions
1. Warranty does not apply to any product which has been altered, subjected
to unusual physical or electrical stress, an Act of God, damaged by
accident, tampered with, or subjected to misuse or abuse including
substituting parts or accessories from other manufacturers without the
written consent of Bennett Pump Company. The above warranties shall not
exist if the original identification marks have been removed or altered.
2. Bennett makes no warranty with respect to the Bennett equipment or
Bennett’s performance of services under this agreement, express or
implied, and Bennett hereby disclaims the implied warranties of
merchantability and fitness for a particular purpose.
3. In no event shall Bennett be liable for any loss of profits, loss of use,
interruption of business or indirect, special, incidental or consequential
damages of any kind in connection with or arising out of the furnishing,
performance, use or failure of the Bennett equipment, software or services
acquired from Bennett, the distributor or the user, whether alleged as a
breach of contract or tortuous conduct, including negligence. Bennett’s
liability hereunder for damages shall not, in any event, exceed the amounts
paid by the buyer to Bennett for equipment, software or services as to
which the claim arose.
4. No action arising out of any claimed breach of the Warranty Agreement or
transaction under this Warranty Agreement may be brought by either party
more than two (2) years after the cause of action has accrued.
5. Use of non-Bennett replacement parts, unless specified by Bennett, will
void the equipment warranty.
6. This warranty only applies to Bennett equipment installed in the United
States of America and Canada.
7. Failure to pay the Bennett invoice within stated invoice terms, covering the
respective Bennett equipment purchased under this limited warranty may,
at Bennett’s discretion, void this limited product warranty.
8. The Warranty Claim must be received no later than 90-days after the
Service performed on the equipment within the warranty period.
BENNETT PUMP COMPANY
BENNETT COMMERCIAL PUMP COMPANY
1218 E. Pontaluna Road Spring Lake, MI 49456
Tel: 231-798-1310 Fax: 231-799-6202
m:\\data\dept\public\warranty\......
Bennett Pump Company or Bennett Commercial Pump Company guarantees new Service Station
Equipment manufactured by Bennett against defects in material or workmanship during the
warranty period in accordance with the provisions stated below:

For this limited warranty to apply, the dispenser(s) must be installed according to the manufacturer’s published installation instructions (shipped
with each dispenser or available upon request). An installation Start-up Card must be performed by a person certified by the manufacturer to
ensure that the installation conforms to Bennett’s installation instructions.
 Warranty service must be performed by the nearest Bennett Authorized Service Representative qualified to perform service on the defective
equipment. Only Authorized and Certified Service Representatives are allowed to perform warranty service. Use of service personnel other
than qualified Bennett Service Representatives without prior approval by Bennett Pump Company will void payment of any warranty claims.
 Bennett equipment has been installed according to the manufacturer’s instructions and diagrams.
 During the warranty period, Bennett Pump Company will, at its option, repair or replace defective parts returned to its factory, transportation
charges prepaid.
 The manufacturer reserves the right to make changes in the design or to make additions or improvements with respect to its products without
incurring any obligation to modify or install same on previously manufactured products.