Need help?Do you have a question about the BenQ 2720S and is the answer not in the manual?
Overview of the professional film scanner's key capabilities and specifications.
Detailed technical specifications of the film scanner, including resolution, speed, and system requirements.
Visual representation and naming of the scanner's main internal components.
Explanation of the basic optical principles for image capture: Auto-Focusing, Imaging, and Receiving.
Step-by-step description of the scanning workflow from preset to output.
Details the parts and function of the optical system for image formation.
Describes the motor and gear system that drives the film/slide holder.
General overview of the film scanner's electrical architecture and main modules.
Explanation of the SCSI protocol and hardware for host computer communication.
Details the ASIC and microprocessor responsible for scanner control and processing.
Describes the ASP on the main board for signal amplification and digitization.
Covers the CCD sensor, amplifier, line motor, and home sensor.
Visual flowchart illustrating the scanner's operational sequence from power-on to standby.
Details connector pin assignments for various boards like SPS, MainBoard, and CCD Board.
Identifies error conditions based on the flashing patterns of the status LED.
Lists common causes and checks for the scanner failing to operate after power-up.
Troubleshooting steps for establishing communication between the scanner and the computer.
Troubleshooting specific to LED error code: 1 flash (Firmware Upgrade error).
Troubleshooting specific to LED error code: 2 flashes (DATA RAM error).
Troubleshooting specific to LED error code: 4 flashes (ASIC error).
Troubleshooting specific to LED error code: 5 flashes (Line Motor/Home Sensor error).
Troubleshooting specific to LED error code: 6 flashes (Auto Focus Motor/Sensor error).
Troubleshooting specific to LED error codes: 7 or 8 flashes (DC Offset/Lamp/CCD error).
Addresses common issues that result in poor scanned image quality.
Troubleshooting steps related to the scanner's power input and internal power distribution.
Specific troubleshooting for the CCD sensor and related components.
Essential safety guidelines and precautions to follow before and during maintenance procedures.
Instructions for safely removing and disassembling the scanner's outer housing.
Procedure for removing the scan motor and transmission assembly.
Steps for disconnecting and removing the main board and power board.
Instructions for removing the front panel board and its connections.
Explanation of factors that influence the scanner's image resolution performance.
Answers to common questions regarding hardware configuration and scanner features.
FAQs addressing driver updates and software compatibility issues.
Common questions about scanner driver installation and SCSI connectivity.
Miscellaneous FAQs covering software registration and CD readability issues.
Guidelines and required data for placing an order for spare parts.
A comprehensive list of available spare parts with part numbers and descriptions.
To Next Page
General