BenQ C600 - Page 49




BenQ C600 Mobile Phone
View outgoing messages
The messages to be sent are stored in Outbox. You can enter the
Outbox by selecting “Outbox” in the Messages Menu.
If you have multiple outgoing messages, press or on the scroll
key to browse messages.
Press “Select” soft key to read the selected message. While reading
the message, you can press the “Options” soft key and select from the
options below:
Status:
Check to see if this message is sent successfully or not.
Erase:
Delete this message.
Send Again:
Send this message again.
Erase messages
You can erase all messages in the Inbox, Outbox, or Draft.
Erase messages in the Inbox
• In the Messages Menu, select “Erase All”, “Inbox”.
• Press “Yes” soft key to erase.
Erase messages in the Outbox
• In the Messages Menu, select “Erase All”, “Outbox”.
• Press “Yes” soft key to erase.
Erase messages in the Draft
• In the Messages Menu, select “Erase All”, “Draft”.
• Press “Yes” soft key to erase.
Customize message settings
To customize message settings, select “Msg Setting” in the Messages
Menu.
You can use the following items provided to customize message
settings: