BenQ C600 Mobile Phone
Callback #:
You can set up the Callback number for all your
outgoing messages here. You can also set up the callback
number separately before you send a message.
Delivery Acknowledgement:
You can set up the status of message
delivery acknowledgement here. If
you set it to ”Yes”, you will receive a
notification when a message is
successfully sent or failed.
Signature:
Signature is a short text (e.g. your name) that will be
automatically attached to your outgoing messages if
enabled. Press the “Select” soft key to access its options
below:
Enable:
Allows you to enable the signature function. To
enable, press “Select” soft key. If there is no
existing signature text, you will be prompted to
enter the signature. When finished, press the
“Ok” soft key.
View:
Allows you to view existing signature.
Edit:
Edit existing signature.
Expire Period:
You can set up the expiration period of message
here. Expiration period is the time the message
center handles the messages you sent and deliver
them to the receiver you specified. If due to any
reason, the message can not be delivered
successfully within the expiration period, the
message will be removed from the message center.
You can specify the duration in 30 minutes, 1 hour,
2 hours, 12 hours, 1 day, 2 days, 3 days.
Save Msg:
With this function, you can decide to save the message
you sent to the Outbox or not. After you get the
acknowledgement of the message, press the “Select” soft
key to access it’s option as follow shows:
Auto Save:
Save the message you sent to the Outbox.
Prompt:
Allows you to save it or not.
Not Save:
Not to save the message you sent to the
Outbox.
To Next Page
Loading...