BenQ DC C30 User Manual

BenQ DC 5530 User’s Manual
Preparing Your DC C30/C40 for Use
8
Englisch
2.8 Setting the Beep Sound
The camera beep sound can be turned on (default) or off as required.
1. Turn the camera on.
2. Press the MENU button.
3. Press the UP or DOWN buttons to select the Setup
Menu.
4. Press SET to enter the Setup Menu.
5. Press the UP or DOWN buttons to select the Beep
option.
6. Press the LEFT or RIGHT buttons to choose On or Off.
7. Press the SET button to save your option and leave the Beep submenu.
2.9 Setting the Power Save Function
To save battery power, your camera can be set to turn itself off after 1, 3 (default), or 5
minutes of inactivity. The period can be set in the Setup Menu.
1. Turn the camera on.
2. Press the MENU button.
3. Press the UP or DOWN buttons to select the Setup
Menu.
4. Press SET to enter the Setup Menu.
5. Press the UP or DOWN buttons to select the Power
Save submenu.
6. Press the LEFT or RIGHT buttons to select off,1, 3 or
5 mins. The camera will turn itself off automatically if
not used for the specified period. You can also turn
the function off completely.
7. Press SET button to save your option and leave the
Power Save submenu.
Note
The Power Save function will work only when the camera is powered by batteries. If a
DC power supply is used, the camera will not turn off automatically.
z
z
Beep
ON OFF
Tv
Tv
SD
F
z
z
Power Save - Off
1min 3min 5min
z
z
Tv
Tv
SD
F
Setup Menu
123
Enter

BenQ DC C30 Specifications

General

Brand	BenQ
Model	DC C30
Category	Digital Camera
Language	English