BenQ DC 5530 User’s Manual
Using the DC C30/C40
22
Englisch
3.19 Erasing a Stored Image
Single images can be erased from the camera in Playback mode.
1. Turn on the camera and make sure it is in Playback mode.
2. Use the LEFT or RIGHT buttons to cycle through the
images to select the one you want to delete.
3. Press the UP (delete) button.
4. Use the UP or DOWN buttons to confirm that you want
to delete the image or press the MENU button to cancel.
5. Press the SET button to complete the action.
3.20 Erasing all Images
You can delete single or all images from the Setup Menu.
1. Turn the camera on and make sure it is in Playback
mode.
2. Press the MENU button.
3. Press the UP or DOWN buttons to select the Delete
option.
4. Press the LEFT or RIGHT buttons to select an option
from the list.
5. Press the SET button to save your selection and leave
the Delete submenu.
Delete button
103_0010 2004/01/19
15/15
Confirm deletion
Delete
NO ALL
YES
To Next Page
Loading...
Need help?
General
