BenQ DC C30 - Page 34

BenQ DC 5530 User’s Manual
Troubleshooting
30
Englisch
Images are not displayed
on the LCD screen.
A memory card with non-
EXIF images (recorded
with another camera) is
loaded.
This camera cannot dis-
play non-EXIF images.
Images are not saved in
memory.
The camera was turned
off before the image was
stored in memory.
If the battery low indica-
tor appears on the LCD
screen, replace the batter-
ies immediately.
Cannot transfer images to
a computer after connect-
ing the USB cable.
The USB driver is not
installed.
• Install the USB driver
before you connect the
camera to a computer.
• Turn the camera on.
Images do not appear on
the television.
• The cable is not con-
nected securely.
• The TV Out setting is
incorrect.
• Use the included video
cable to connect the
camera to a TV.
• Set the video system to
the correct setting,
NTSC or PAL.
Problem Cause Resolution