BenQ DC 5530 User’s Manual
Troubleshooting 27
English
The camera does not
shoot even when
pressing the shutter
button.
The battery is running low. Recharge or use the AC power adapter.
The camera is not in shooting mode. Slide the mode switch to shooting
mode.
The shutter button was not pressed all
the way down.
Press the shutter button all the way
down.
The internal memory or memory card
does not have any free space.
Load a new card or delete unwanted
files.
The flash is recharging. Wait until the flash mode icon, indi-
cated on the screen, stops flashing.
The camera doesn’t recognize the
memory card.
Format the memory card in this camera
before its first use or before using it
with another camera.
Cannot format a
memory card.
The memory card is write-protected. Remove the write protection.
End of the memory card life. Insert a new memory card.
Cannot download
images.
There is insufficient free space on your
computer’s hard disk.
Ensure that the hard disk has space for
running Windows and that the drive for
loading image files has free space equal
to or greater than the memory card in
the camera.
There is no power being supplied to
the camera.
Turn the power on. Use the AC adapter
or recharge the battery if need be.
Symptom Cause Measure
To Next Page
Loading...
Need help?
General
