BenQ DC 5530 User’s Manual
Using the DC E63+ 5
English
3 USING THE DC E63+
3.1 Capture Mode
1. Press the POWER button to turn on the camera.
2. Slide the mode switch to [ ].
3. Compose your image in the LCD monitor.
4. Press the shutter button down halfway (1),
then press it down fully (2).
• Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure.
• The focus area frame turns blue when the
camera is focused and the exposure is
determined.
• When the focus or exposure is not suit-
able, the frame of the focus area turns
yellow.
• If the photographic preview is set to "ON", the captured image will be displayed while
the image is being recorded onto the memory.
• The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
• To prevent your images from being blurred while pressing the shutter button, always
hold the camera steady. This is especially important when you are shooting under low
lighting conditions, under which your camera may reduce the shutter speed to ensure
your images are properly exposed.
• Pressing the button changes the LCD display in the sequence of: Standard Display
→ Simplified Display → No Information.
• To review the last captured image, press the SET button. Press the SET button again to
return to the camera mode.
1
Press down halfway
2
Press down fully
To Next Page
Loading...
Need help?
General
