4 Preparing the camera for use
English
Charging the battery
The battery charge status affects the camera performance. To maximize the performance
and the battery life, fully charge the battery using the camera and a wall outlet (or a
computer), and then fully discharge it through normal use at least once.
To charge the battery via a wall outlet:
1. Turn off the camera.
2. Insert the battery into the camera.
3. Connect one end of the USB cable to the
camera.
4. Connect the other end of the USB cable to the
power adapter.
5. Plug in the power adapter to a wall outlet. The
battery will start charging immediately.
To charge the battery via a computer:
1. Turn on the computer.
2. Turn off the camera.
3. Insert the battery into the camera.
4. Connect one end of the USB cable to the camera.
5. Connect the other end of the USB cable to your
computer. The battery will start charging
immediately.
C
To remove the battery:
1. Open the battery/card cover.
2. Release the battery lock lever.
3. When the battery has come out a little, gently pull it
out the rest of the way.
4. Close the battery/card cover.
D
You need to follow the instructions above to ensure successful charging.
T1460 UM-EN.book Page 4 Thursday, September 23, 2010 6:31 PM
To Next Page
Loading...
Need help?
General
