BenQ G2010WP Service Manual

19
Photo
Sharpness 不可调节
下的 Senseye Demo
自动变为 ON
2. Senseye Demo 处
于 ON 时,做 Auto
自动变为 OFF
sRGB
Sharpness 不可调节
Senseye Demo (ON/OFF) OFF
Full full
Display Mode
Aspect
Input (D-sub/DVI)
Language
-EU version: 14 languages
(English/Français/Deutsch/Italiano/Espanol/Po
lish/Czech/Hungarian/Serbo-croatian/Romani
an/Netherlands/Russian/Swedish/Protuguese)
-Asian version: 8 languages
(English/Francais/Deutsch/Italiano/Espanol/日
本語/繁體
中文/简体中文)
English
H. Position (0~100) 50
V. Position (0~100) 50
Display Time (5, 10, 15, 20, 25, 30) 15
OSD Settings
OSD Lock
(ON/OFF)（按 Menu 鍵 15s 即可解除鎖定）
OFF
DDC/CI (ON/OFF) - ON
Information - -
SYSTEM
Reset All (YES/NO) -
4.2.3.3. Factory Mode Introduction
When signal is input, press “power key” to turn off the monitor. Press “ENTER”+“MENU” +“Power” together to
turn on the monitor. After power on, press “MENU” to call out Main Menu, then press “-“for select the “F” item, then
press “Enter”, you can go into Factory mode.
AUTO: Automatically calibrate chip ADC parameter by using chip internal DAC.
GAIN: ADC gain value
OFFSET: ADC offset value
9300K: Set color temperature 9300K
5800K: Set color temperature 5800K
6500K: Set color temperature 6500K
USER: Set user preferred color temperature
LANGUAGE: Country language
Reset BL Hr: the time of backlight
Reset Total Hr: the total time when connect power
Return: exit the factory menu
4.2.3.4 After repair, to ensure the quality you should do the following test and adjustment

BenQ G2010WP Specifications

General

Brand	BenQ
Model	G2010WP
Category	Monitor
Language	English