BenQ GP20 - Remote Control

Introduction
11
Remote control
1. POWER
Toggles the projector between standby
mode and on. See "Starting up the
projector" on page 27 and "Shutting down
the projector" on page 77 for details.
2. Mute
Toggles projector audio between on and
off.
3. Up key
When the On-Screen Display (OSD)
menu is on:
- Navigate up to select the desired menu
items.
- Make adjustments. (e.g. manual
keystone, etc.)
When the On-Screen Display (OSD) is
off:
- Magnifies the projector volume level.
4. Left key
When the On-Screen Display (OSD)
menu is on:
- Navigate left to select the desired menu
items.
- Make adjustments. (e.g. brightness,
contrast, etc.)
When the On-Screen Display (OSD)
menu is off: (Only applied to SD card,
internal memory and USB Drive)
- Plays previous video, music, photo
slideshow or document.
- Press and hold to rewind video and
audio file.
5. Down key
When the On-Screen Display (OSD)
menu is on:
- Navigate to down to select the desired
menu items.
- Make adjustments. (e.g. manual
keystone, etc.)
When the On-Screen Display (OSD) is
off:
- Reduces the projector volume level.
6. Menu
Turns on or off the Pop-up setting menu.
7. Home
Directly returns to home screen from
lower level of OSD.
Exits application/pop-up message and
back to home screen directly.
8. Prev.
Plays previous video, audio, photo
slideshow or document file. (Only
applied to SD card, internal memory,
USB Drive and MHL)
9. Play
Plays or pauses video, music or photo
slideshow. (Only applied to SD card,
internal memory, USB Drive and MHL)
1
2
3
5
7
9
4
6
8
14
13
12
11
10
16
17
18
19
15
I
I