Why won't my BenQ Projector turn on?
Your BenQ Projector might not be turning on due to a couple of reasons. First, check that the power cord is securely plugged into both the AC power jack on the projector and the power outlet, ensuring the outlet switch is on. Another possibility is that you're trying to turn the projector on again during the cooling process; wait until this process is completed before attempting to power it on again.
What to do if my BenQ GP100 Projector has no picture?
If your BenQ Projector isn't displaying a picture, there might be a few reasons. First, ensure the video source is turned on and properly connected. Also, the projector may be in Audio-only, power saving, or eye protection mode, so press the power key to disable these. Check the connection to the input signal device to ensure it is correct. Finally, verify that you've selected the correct input signal using the appropriate key.
How to fix a BenQ Projector remote that is not working?
If your BenQ Projector remote isn't working, there are a few things you can check. Start by replacing both batteries with new ones. Ensure there are no obstacles between the remote and the projector that could be blocking the signal. Finally, make sure you are within 8 meters (26 feet) of the projector.
General| RMS rated power | 5 W |
|---|---|
| Number of built-in speakers | 2 |
| Color gamut | 97 % |
| Number of colors | 16.7 million colors |
| Native aspect ratio | 16:9 |
| Vertical scan range | 23 - 85 Hz |
| Horizontal scan range | 15 - 135 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 100000:1 |
| Screen size compatibility | 80 - 120 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | 30 ° |
| Ethernet LAN | - |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Bluetooth version | 5.0 |
| Noise level | 28 dB |
| Preset modes | Bright, Cinema, Custom, Game, ISF Day |
| Operating system version | 11.0 |
| Operating system installed | Android |
| Noise level (economic mode) | 26 dB |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Blue, White |
| Market positioning | Portable |
| Cables included | AC |
| Bundled software | Wireless Projection/ VLC/ BenQ Notification |
| Quantity per pack | 1 pc(s) |
| Operating temperature (T-T) | 0 - 40 °C |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 120 W |
| DVI port | No |
| Audio (L/R) in | 0 |
| Headphone outputs | 1 |
| HDMI connector type | Full-size |
| USB 2.0 ports quantity | 3 |
| Video color modes | BT.709 |
| Analog signal format system | Not supported |
| Focus | Auto |
| Offset | 100 % |
| Throw ratio | 1.2 |
| Fixed focal length | 8.90755 mm |
| Light source type | LED |
| Service life of light source | 20000 h |
| Service life of light source (economic mode) | 30000 h |
| Security updates end date | 31/12/2026 |
Weight and Dimensions| Depth | 213.5 mm |
|---|---|
| Width | 169 mm |
| Height | 193 mm |
| Weight | 2900 g |
Essential guidelines for safe operation, placement, and handling of the projector.
Warnings regarding temperature, humidity, dust, and flammable materials.
Instructions on avoiding damage, looking into the lens, and LED life.
Warnings about moisture condensation and avoiding volatile liquids.
Explanation of all input/output ports and their capabilities.
Steps for connecting wirelessly using the ATV dongle.
Guides for establishing wired connections using various ports.
Factors and methods for selecting an optimal installation location for the projector.
Guides through the initial power-on sequence and setup process.
Optimizing image quality automatically using built-in settings.
How to adjust the projector's angle using the kickstand.
Adjusting focus for sharp and clear projected images.
Correcting geometric distortions using keystone correction.
Adjusting corner fit and image size for screen fit.
Diagnosing and resolving issues related to LED indicators and projector power.
Solutions for problems like no picture or blurred images.
Addressing remote control malfunctions and screen brightness problems.
Detailed technical data for display, optical, compatibility, I/O, and audio.
To Next Page
