23
Remote control effective range
The projector has one IR remote control sensor located at the front of the
projector with a range of 8 meters (~26 feet) at an angle of 30 degrees (left
and right) and 30 degrees (up and down). Prior to remote control pairing
process during the setup wizard (see "Powering on and initial setup" on
page 30), the remote control can only be used either by pointing it
directly at the IR sensor or by reflecting the IR signal off of a wall/screen,
makingsure that there are no obstacles between the remote control and
the IR sensor on the projector.
Once the remote control has been paired to the ATV dongle installed in the
projector, you will be able to use it at any angle within a range of 8 meters
(~26 feet).
Note
Voice search functionality on the remote control is only available after the remote control has been
paired to the projector during the setup wizard process. See "Powering on and initial setup" on page
30 for more details.
To Next Page
Loading...
