BenQ GP100 - Fitting Image to Screen (Corner Fit, Zoom)

38
Corner Fit
Adjust when the four corners of the projected image are distorted.
1. Press the
button on the remote control to enter the projector’s
settings menu.
2. Go to Installation > Geometry Setting > Corner Fit Adjustment.
3. Choose one of the corners you want to adjust and then follow the on-
screen instructions to correct the image.
Corner Fit
Zooming an image
Zoom an image to change the size of the display content.
1. Press the button on the remote control to enter the projector’s
settings menu.
2. Go to Installation > Geometry Setting > Digital Zoom.
3. Press the keys to adjust the screen to zoom in/out.