BenQ GP100 - Power Supply Options

29
Power supply
Supply power to your projector by one of the following methods.
• (Recommended) Via the provided DC power adapter. The Power Mode
is switched to Normal or the previous mode you set.
• Via a power bank or power adapter with USB-C connector or
USB-C cable that are certified by USB-IF. See PD in information in
"Specifications" on page 66 for details. Depending on the power
voltage, the projector's Power Mode as well as the picture brightness
are switched automatically. See "Power Mode" on page 55 for more
information.
Note
• The USB-C port is able to provide power to the connected devices. See “Power delivery to a USB-C
device” on page 50 for more information.
• The USB-A port is able to provide power to the connected devices. See “Specications” on page
66 for details.
• Please only use the supplied power adapter to avoid possible dangers such as electric shock and
re.
• Availability of options under Power Mode vary by the power voltage supplied to your projector. To
have all options available, use the supplied DC power adapter and power cord.