60
Item Options and descriptions
System Information
Displays hardware/software information for the
projector including its device name, operating
system version, memory, storage capacity and
serial number.
Projector Information
Displays information on the current status of
the projector including the Detected Resolution,
Source, Picture Mode, Power Mode,
Color System, Light Source Usage Time,
Firmware Version, and Service Code.
Factory Reset
Returns the projector to its factory default state.
Note
This function resets your projector only. If you wish to reset
your ATV dongle (QS02), perform factory reset from the Android
settings menu.
To Next Page
Loading...
