33 Menu operation
DISPLAY menu
Image
Position
Displays the position adjustment page. To move the projected image, use the
directional arrow keys. This function is only available when a PC signal (analog RGB)
is selected.
Overscan
Adjustment
Conceals the poor picture quality in the four edges.
The greater the value, the more portion of the picture is concealed while the
screen remains filled and geometrically accurate. Setting 0 means the picture is
100% displayed.
PC Tuning
• H. Size: Adjusts the horizontal width of the image.
• Phase: Adjusts the clock phase to reduce image
distortion.
• Auto: Adjusts the phase and frequency automatically.
These functions are only available when the PC signal is selected.
3D
This projector features a 3D function which enables you to enjoy the 3D movies,
videos, and sporting events in a more realistic way by presenting the depth of the
images. You need to wear a pair of 3D glasses to view the 3D images.
• 3D Mode: If you want the projector to automatically choose an appropriate 3D
format when detecting 3D contents, select Auto. If the projector cannot
recognize the 3D format, press / to choose a 3D mode from among
Top-Bottom, Frame Sequential and Side by Side.
w
• When 3D function is activated:
- The brightness level of the projected image will decrease.
- The following settings cannot be adjusted: Picture Mode, Reference Mode.
• 3D Sync Invert: When you discover the inversion of the image depth, enable
this function to correct the problem.
These functions are only available when the HDMI2 or HDMI3 signal is selected.
To Next Page
