BenQ LK990 - Control Panel

8 Introduction
Control Panel
1. SOURCE
Displays the source selection bar.
2. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu is
activated, these keys are used as directional
arrows to select the desired menu items and
to make adjustments.
3. BACK
Goes back to previous OSD menu, exits and
saves menu settings.
4. MODE
Selects an available picture setup mode.
5. OK
Confirms the selected On-Screen Display
(OSD) menu item.
6. MENU
Turns on the On-Screen Display (OSD) menu.
7. POWER
Toggles the projector between standby mode
and on.
All the key presses described in this document are available on the remote control or projector.
6
4
3
7
2
1
5