41 Menu operation
Image
Resizing
Digital Zoom
Magnifies or reduces the projected image size.
1. After the adjustment bar displays, press / on the projector or
ZOOM+/ZOOM- on the remote control repeatedly to reduce or magnify the
image to a desired size.
2. Press OK to enter panning mode.
3. Press the directional arrows ( , , , ) on the projector or remote control
to navigate the picture.
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Digital Shrink & Shift
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press / repeatedly to shrink or magnify
the picture to a desired size.
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows ( , , ,
) to shift the image.
4. Press AUTO to restore the picture to its original size.
The picture can only be shifted after it shrank.
Blanking
Blanks some parts of the projected image.
1. Select the Modes of Adjustment first by pressing / .
2. Press / to highlight the area you want to adjust and press / to adjust its
range.
Enacting the Reset All Blanking Settings function will return all items in the Blanking menu to
the factory preset values. Pressing AUTO clears the values of selected item (excluding Modes of
Adjustment).
Native
Resolution
• Display Resolution Switch: Select the native resolution of this projector
between WUXGA and 1080P.
• Digital Lens Shift: After the Digital Lens Shift page displays, press / to
shift the projected image.
This function is not available in the following situations: Picture Mode is 3D; Display Resolution
Switch is WUXGA.
Reset Display
Returns all of the adjustments you’ve made for the Display menu to the factory
preset values.
To Next Page
Loading...
