42 Menu operation
Network
Settings
Wired LAN See Controlling the projector through a Wired LAN environment on page 25.
AMX Device
Discovery
When this function is On, the projector can be detected by AMX controller.
MAC Address
(Wired)
Displays the mac address for this projector.
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See Choosing a location on page 11.
Remote
Receiver
Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Auto Source
Search
Allows the projector to automatically search for a signal.
Auto Sync
• On: Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
• Off: The projector will not respond when AUTO is pressed.
Dynamic
Dimming
Allows the projector to automatically detect the video content and enhance
contrast during dark scenes.
Light Settings
• Light Mode: See Setting the Light Mode on page 48.
• Custom Brightness: Only available when Light Mode is Custom.
• Light Usage Time: Displays the number of hours the light source has been
used.
To Next Page
Loading...
