BenQ LX710 - Page 20

20 Positioning your projector
3. When 2D Keystone correction page displays, you can also do the following settings:
• Press AUTO to reset the keystone values.
• Press / to disable the auto vertical keystone function.
Adjusting Corner Fit
You can manually adjust four corners of the image by setting the horizontal and vertical values.
1. Do one of the following steps to display the corner fit correction page.
• Press QUICK INSTALL on the remote control. Press to highlight Corner Fit and press
OK.
• Go to Advanced Menu - Display > Corner Fit and press OK.
2. Press / / / to select one corner and press OK.
3. Press / to adjust vertical values.
4. Press / to adjust horizontal values.
Corner Fit
Press to reset corner value
Exit