BenQ LX710 - Page 37

37 Menu operation
Volume Adjusts the sound level.
Light Mode See Setting the Light Mode on page 49.
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Mode: Shows the selected mode in the Light Settingsmenu.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light source has been used.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the projector serial number.
Menu Type Switches to the Advanced OSD menu. See Using the menus on page 24.