43 Menu operation
Network
Image
Resizing
Digital Zoom
Magnifies or reduces the projected image size.
1. After the adjustment bar displays, press / repeatedly to reduce or magnify
the image to a desired size.
2. Press OK to enter panning mode.
3. Press the directional arrows ( , , , ) on the projector or remote control
to navigate the picture.
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Digital Shrink & Shift
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press / repeatedly to shrink or magnify
the picture to a desired size.
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows ( , , ,
) to shift the image.
4. Press AUTO to restore the picture to its original size.
The picture can only be shifted after it shrank.
Blanking
Blanks some parts of the projected image.
1. Select the Modes of Adjustment first by pressing / .
2. Press / to highlight the area you want to adjust and press / to adjust its
range.
Enacting the Reset All Blanking Settings function will return all items in the Blanking menu to
the factory preset values. Pressing AUTO clears the values of selected item (excluding Modes of
Adjustment).
Digital Lens
Shift
After the Digital Lens Shift page displays, press / to shift the projected image.
This function is not available in the following situations: Picture Mode is 3D; Display Resolution
Switch is WUXGA.
Reset Display
Returns all of the adjustments you’ve made for the Display menu to the factory
preset values.
Wired LAN See Controlling the projector through a Wired LAN environment on page 27.
To Next Page
Loading...
