BenQ LX710 - Page 47

47 Menu operation
Information
Closed
Caption
• Closed Caption Enable: Activates the function by selecting On when the
selected input signal carries closed captions.
Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and
videos that are closed captioned (usually marked as "CC" in TV listings).
• Caption Version: Selects a preferred closed captioning mode. To view captions,
select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Display
Resolution
Switch
(LU710/LU710D
/LU930/LU930D)
Select the native resolution of this projector between WUXGA and 1080P.
Factory
Default
Returns all settings to the factory preset values.
The following settings will still remain: 2D Keystone, Auto Vertical Keystone, Corner Fit,
Projector Installation, Light Usage Time High Altitude Mode, Security Settings, Baud
Rate, LumiExpert, Corner Fit, Digital Shrink & Shift, Digital Lens Shift, Network, HDMI
Equalizer, Display Resolution Switch, Dynamic Dimming,Custom Brightness.
Reset System
Returns all of the adjustments you’ve made for the System menu to the factory
preset values.
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Mode: Shows the selected mode in the Light Settings menu.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light source has been used.
• Firmware Version: Shows the firmware version of your projector.