Operation36
Note that the menu items are available when the projector detects at least one valid signal.
If there is no equipment connected to the projector or no signal detected, limited menu
items are accessible.
Main menu Sub-menu Options
5.
SYSTEM
SETUP:
Advanced
High Altitude Mode On/Off
Audio Settings
Mute On/Off
Volume
Power On/Off
Ring Tone
On/Off
Lamp Settings
Lamp Mode Normal/Economic/Smart Eco
Reset lamp timer
Equivalent Lamp Hour
Security
Settings
Change Password
Change Security
Settings
Power On Lock
Baud Rate
2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed Caption
Closed Caption
Enable
On/Off
Caption Version CC1/CC2/CC3/CC4
Standby
Settings
Monitor Out On/Off
Audio Pass
Through
On/Off
Reset All Settings
6.
INFORMA
TION
Current System Status
• Source
• Picture Mode
• Resolution
• Color System
• Equivalent Lamp Hour
• Firmware Version
To Next Page
Loading...
