35
8.6 Faults must be able to be repeatedly demonstrated.
9.0 TEST CONDITIONS
Unless other prescription, the test conditions are as followings:
Nominal voltage: refer to operation manual
Environmental illumination:
Variable from 500 to 800 Lux (For appearance inspection)
Variable from 0 to 7 Lux (For functional inspection)
Temperature: 25±5℃
Visual inspection shall be done with the distance from eyes to the sample 40-50 cm.
Display mode: refer to operation manual
10.0 TEST EQUIPMENTS
Dark room
PC
Pattern Generator: Chroma or equivalent
DVD player
Power supply (100~240 VAC) with consumption meter
Measuring tape
To Next Page
Loading...
