Specifications
100
Minimum Ceiling Height (mm) = f + H + b + 60 + 262.2+ c
• The dimensions are based on the BenQ wall mount (P/N: 5J.J4R10.001).
• All measurements are approximate and may vary from the actual sizes. BenQ recommends that if
you intend to permanently install the projector, you should physically test the projection size and
distance using the actual projector in situ before you permanently install it, so as to make
allowance for this projector’s optical characteristics. This will help you determine the exact
mounting position so that it best suits your installation location.
• The dimensions supplied are offered as a guide only and may differ depending on several factors
relating to any specific installation.
• The dimensions are based on the projector being configured with zero keystone correction.
• The dimensions assume that the wall mount arm is positioned 90° from the bottom case of
projector and screen surface.
Projection
area
W
e
Distance from floor
to bottom of image
f
Floor
Ceiling
H
Screen
c
60
a
20
60
150
180
Wall plate
b
H
D
246.5
262.2
To Next Page
Loading...
