BenQ MX766 - Specifications

Specifications
96
Specifications
All specifications are subject to change without notice
Lamp life results will vary depending on environmental conditions and usage.
Optical
Resolution
(MX766/MX822ST)
1024 x 768 XGA
(MW767)
1280 x 800 WXGA
Display system
1-CHIP DMD
Lens F/Number
(MX766/MW767)
F= 2.42~2.98
f= 20.77mm~31.13mm
(MX822ST)
F = 2.8
f = 7.26 mm
Offset
(MX766/MX822ST): 130%
(MW767): 125%
Zoom ratio
(MX766/MW767): 1.5X
(MX822ST): Fixed
Lamp
310 W lamp
Electrical
Power supply
AC100–240V, 4.20 A,
50-60 Hz (Automatic)
Power consumption
420 W (Max.)
Mechanical
Weight
3.9 kg (8.6 lbs.)
Output terminals
RGB output
D-Sub 15-pin (female) x 1
Speaker
(Stereo) 20 watt x 1
Audio signal output
PC audio jack x 1
Control
LAN control
Wire (RJ45)
Wireless (USB A type)
Firmware upgrade (USB B type)
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 2
Video signal input
S-VIDEO
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital-HDMI x 1
Audio signal input
Audio in
PC audio jack x 1
RCA audio jack (L/R) x 2
Remote desktop /USB reader /document camera
supported (USB A type)
USB display (USB mini B type)
PD pen compatibility (PD dongle in Jack only for
MX822ST)
Environmental Requirements
Operating temperature
0°C-40°C at sea level
Operating relative humidity
10%-90% (without condensation)
Operating altitude
0-1499 m at 0°C-35°C
1500-3000* m at 0°C-30°C (with High
Altitude Mode on)
* China region only applies to an altitude of
2000m.