Operation
55
i. You can name the projector, keep track of its location and the person in charge
of it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjusents, press the Send button and the data will be saved in the projector.
v. Press exit to go back to the Crestron remote network operation page.
The info page displays the information and status of this projector.
i. Press exit to go back to the Crestron remote network operation page.
The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages
once the password is entered. The default password is “0000”. If you want to change the
password, please enter Basic page.
i
To Next Page
Loading...
