Operation
85
FUNCTION DESCRIPTION
Network Settings
AMX Device Discovery
Selecting On the projector can be detected by AMX controller.
Mac Address
Show Mac address.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings, Baud Rate.
Current System
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Lamp Mode
Shows the current lamp mode.
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp
Displays the number of hours the lamp has been used.
Firmware Version
Shows firmware version.
5. SYSTEM SETUP: Advanced menu
6. INFORMATION menu
To Next Page
Loading...
